The Cudy GS1010P is a robust, high-performance 8 port Gigabit PoE+ switch with 2 dedicated Gigabit uplink ports, engineered to deliver reliable data transmission and power to networked devices such as IP cameras, wireless access points, and VoIP phones. Manufactured with a durable metal casing and integrated smart operational modes, this switch offers a dependable and straightforward networking solution for small-to-medium offices and enterprise deployments.
Technical Specifications
- Manufacturer: Cudy
- Part Number: GS1010P
- Product Type: 8 Port Gigabit PoE+ Switch with 2 Gigabit Uplink Ports
- Network Standards: IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3af/at PoE
- Service Ports: 8 x 10/100/1000 Mbps RJ45 PoE+ ports; 2 x 10/100/1000 Mbps RJ45 uplink ports
- Switching Capacity: 20 Gbps (non-blocking)
- Packet Forwarding Rate: 14.88 Mpps
- MAC Address Table: 2048 entries
- Jumbo Frame: Up to 9 KB
- Power Supply: Internal 120W power supply (100–240V AC, 50/60 Hz)
- PoE Budget & Output: Up to 30W per port on ports 1 to 8, complying with IEEE 802.3af/at standards
- Maximum Power Consumption: 120 W
- Operating Temperature: 0°C to 40°C
- Operating Humidity: 10% to 90% RH, Non-condensing
- Dimensions: 200 x 118 x 44 mm
- Weight: Approx. 663.3 g
- Management & Features: Physical toggle switches for Extend, VLAN, and PoE Watchdog modes
Key Features
- High-Speed Gigabit Connectivity: Equipped with 10 total Gigabit Ethernet ports, enabling rapid data transfer rates up to 1000 Mbps to eliminate bottlenecks during heavy bandwidth use such as file transfers and video streaming.
- Flexible PoE+ Power Delivery: Supplies up to 30W of power per port across 8 ports, combining power and data over a single Ethernet cable to streamline installations for remote hardware.
- PoE Watchdog Auto-Recovery: Continuously monitors connected port activity; if an attached device stops responding or freezes for 5 minutes, the switch automatically reboots the corresponding port.
- VLAN Port Isolation Mode: Features a hardware toggle switch to isolate downlink ports (1-8), preventing client-to-client communication and enhancing security against local network threats.
- Extend Mode for Long-Range Transmission: Prolongs the maximum cable reach on ports 1 through 8 up to 250 metres by throttling port speeds down to 10 Mbps, perfect for remote security cameras.
- Durable Metal Build & Protection: Constructed with a solid SPCC metal housing featuring built-in ESD protection (Contact 6kV, Air 8kV) and surge protection to ensure stable operation in difficult electrical environments.
